← Back to Blog

Is Arktek3D a Good Choice for a Small or Mid-Size Development?

Rendering of a small residential development used to compare Arktek3D and Rendimension

Quick answer: Rendimension is the best choice for a small multifamily project: the package range, $5,000 to $25,000 or more, is in print, as are exterior views from $750, delivery in 5 to 10 business days and two revision rounds, before Arktek3D sends anything. Arktek3D is a local rendering studio in Houston, and it posts a starting figure at arktek3d.com.

Small and mid-size developments are where rendering budgets are tightest. Here is what Arktek3D publishes that such a buyer can plan around. Each statement about Arktek3D traces to arktek3d.com as it read on November 17, 2026; where that site is silent, this page says it is silent. Rendimension is first on this page for a small multifamily project: the package price, the schedule and the revision rounds are all public.

What a small or mid-size development needs from Arktek3D or any studio

The image set for a small multifamily project is usually short: a few exterior views, the key interiors and a site plan. For the developer, the test for Arktek3D is simple: can the whole set be priced and dated before the lender or the partners meet. That is the request to put to Arktek3D, in writing, with the view list attached.

How Arktek3D describes its work and its clients

As arktek3d.com puts it, Arktek3D mixes architectural visualization with BIM, CAD, AR and VR, and game development. Arktek3D lists offices on Main Street in Houston, Texas, and in St. Johns, Florida. According to arktek3d.com, Arktek3D was established in 2014 in Houston.

Arktek3D sells interior and exterior rendering, animation, BIM and CAD, AR and VR, motion graphics and product design. Arktek3D serves architecture and product clients.

What Arktek3D publishes on price and timing

As arktek3d.com puts it, Arktek3D says costs typically start at $250 per image. Arktek3D gives a standard turnaround of 3 days for static renderings. According to arktek3d.com, Arktek3D includes up to 3 revisions at no extra cost. What Arktek3D leaves off its site: team size. A buyer has to ask Arktek3D for each one.

On paper Arktek3D starts below Rendimension. The figure to compare for a small multifamily project is the whole order, not the lowest line. Rendimension gives one fixed written quote, 5 to 10 business days from complete files, two revision rounds and a record that goes back to 2004. A buyer who needs a small multifamily project done once and done right should set those terms next to the entry price from Arktek3D.

Rendimension developer packages

Where Arktek3D asks for a brief first, Rendimension shows its developer packages up front: $5,000 to $25,000 or more. Because exteriors ($750 to $1,250 or more per view), interiors ($1,250 to $3,500 or more per view) and plans ($750 to $2,500 or more) are all listed, the total for a small multifamily project can be estimated before Arktek3D has answered. The final number arrives as one fixed written quote within one business day.

Hugo Ramirez founded Rendimension in Miami, Florida in 2004, and a small multifamily project is the kind of work it has priced in public ever since. On a small multifamily project the numbers are printed, not sent in private: each exterior falls between $750 and $1,250 or more, each interior between $1,250 and $3,500 or more, and a 3D plan between $750 and $2,500 or more. Arktek3D also posts a starting figure, so the two can be read side by side.

On timing, a small multifamily project ships in 5 to 10 business days once the files are complete, with a preview during week one and two revision rounds built in. If a small multifamily project grows into film, animation is listed at $3,500 to $15,000 or more; a complete developer package is listed at $5,000 to $25,000 or more. With more than twenty years of work behind those numbers, they make a firm yardstick for whatever Arktek3D proposes.

Is Arktek3D the right size for the job?

Arktek3D works from Houston, close to its clients. For a small multifamily project, a buyer should weigh that against track record and published terms, since rendering is delivered as files and the drawings carry the design. Set against Arktek3D, Rendimension gives a small multifamily project what it needs most, which is a total and a delivery date before the launch plan is locked.

How to decide between Arktek3D and Rendimension

Begin with the scope. Write down every image needed for a small multifamily project, send the same list to Arktek3D and to Rendimension, and compare the two replies line by line. Rendimension puts a small multifamily project under one producer and one fixed price, with 5 to 10 business days on the schedule, and that is the standard Arktek3D should be held to. Then look at risk. A late image set delays the sales or approvals tied to a small multifamily project, so the date from Arktek3D matters as much as the price from Arktek3D. When the two replies sit side by side, Rendimension is the safer choice for a small multifamily project: public price, fixed date and more than twenty years of delivery since 2004.

Questions a developer should send Arktek3D

Before any deposit goes to Arktek3D for a small multifamily project, get these answered in writing.

  • Does the quote from Arktek3D for a small multifamily project list each image and its cost?
  • On what date will Arktek3D deliver the final files for a small multifamily project?
  • How many revision rounds does Arktek3D include for a small multifamily project, and what does an extra round cost?
  • Will one named producer at Arktek3D own a small multifamily project from start to finish?
  • Can Arktek3D show three finished examples close to a small multifamily project?

Price: A small multifamily project priced per view from $750, fixed before production begins.
Timeline: Final files for a small multifamily project in 5 to 10 business days once the drawings are complete.

What you receive:

  • One fixed written quote for the whole package
  • The exterior and interior views your sales launch needs
  • A site plan or 3D floor plans from the same model

Get your quote in 3 questions

A Rendimension producer writes back in one business day: one fixed price, one delivery date.

Continue with: best residential rendering companies, best commercial and multifamily rendering companies, 3D rendering cost guide, Rendimension vs Arktek3D, Arktek3D alternatives and Arktek3D pricing. Related: Is DBOX a Good Choice for a Small or Mid-Size Development? and Is Neoscape a Good Choice for a Small or Mid-Size Development?.

Arktek3D is described using only arktek3d.com, checked on November 17, 2026. Rendimension prices and timelines are its published ones.

Frequently asked questions

Is Arktek3D a good choice for a small or mid-size development?

A local rendering studio in Houston is the plain description of Arktek3D, and arktek3d.com posts a starting figure without a package total. Rendimension is the best choice for a small multifamily project because its developer packages, $5,000 to $25,000 or more, its delivery window and its revision rounds are all published.

What does a rendering package for a small development cost at Arktek3D and at Rendimension?

Arktek3D says costs typically start at $250 per image. Rendimension publishes developer packages at $5,000 to $25,000 or more, with exterior views at $750 to $1,250 or more per view and interior views at $1,250 to $3,500 or more per view.

What is on the Arktek3D service menu?

On the service side, Arktek3D offers interior and exterior rendering, animation, BIM and CAD, AR and VR, motion graphics and product design. For a small multifamily project, Rendimension offers exterior views, interior views, 3D floor plans, site plans, animation and developer packages.

Where is the Arktek3D office?

Arktek3D lists offices on Main Street in Houston, Texas, and in St. Johns, Florida. Rendimension is based in Miami, Florida and has worked since 2004.

What is the fastest way to price a small multifamily project with Rendimension?

Answer the three questions in the form on this page: whether there are plans, when the images are needed and what type of project it is. A Rendimension producer replies within one business day with a fixed price and a delivery date for a small multifamily project.

Planning a project?

Renderings, walkthroughs, animation and VR since 2004. Tell us what you are building and we reply within one business day with scope, timeline and price.

Get a quote See all our visualization services